The Corner template -Stop looking for random rounded objects to get the perfect radius!
I made this template to help me round corners on tables and other pieces easily, rather than using a tape roll or some other random thing. I like to use a pattern bit with it and clamp it to the corner of the piece. this will help to ensure that all 4 corners are uniform and look professional. The 4 radii of the piece 0.5”, 1”, 1.25”, and 1.87”. custom templates are available if you want something else. For anything over 0.5” I will often cut the corner close to the pattern with a saw and then round it just to prolong bit life and make it safe for myself. The size of this pattern allows you to clamp it to the edges with clamps of your choice and then use a pattern bit to follow the edge and round the corner.
This purchase is only for a pattern, not for the bit. The pattern itself is laser cut 1/4” MDF. The pattern measures just under 12x6 inches.
The Cornhole template - This is the easiest way to make holes for cornhole boards!
When making cornhole boards there are several ways to make the holes for the bags but they have to be 6 inches in diameter and centered 9 inches from the end. This template sits flush to the end of the cornhole board and the 6” hole can be cut with a bearing pattern bit as seen in the photos. I like to use a 1/4” bit and cut down from the top. Using this pattern will result in perfect cornhole hole placement every time - simply place the bottom arrow in the exact middle of your board and square to the end and your hole will be perfectly placed. Alternatively you can sure to each side and center it exactly that way as well!
This purchase is only for a pattern, not for the bit. The pattern itself is laser cut 1/4” MDF.
